Most people opt for an automatic transmission to avoid the agony of shifting, but even that has its own rules. No, putting dead bodies in the traffic light is not right.
Many drivers turn to the automatic transmission for the convenience it offers in daily commutes, especially in the city, where stop-start traffic is a daily torture for owners of manual transmissions. Most people think that with an automatic, you only press the accelerator and the brake and nothing else is needed. Big mistake, since even automatic transmissions have their own rules and driving lessons.
Manual transmission requirements
Manual transmissions driving lessons may “require” the gear to go into neutral at every stop, but this is not the case with automatics, and if you do, it’s best to stop it. You may think that having Driven selected while you are stopped is forcing the transmission, but this is not the case. Especially the most modern automatic transmissions understand that the car has stopped and disengage the disc, eliminating friction and wear. At the same time, when the selector is in neutral, the engine revs higher, consuming more fuel. The situation is similar when you select N while the car is in motion.
Don’t be a cannibal
You should not put in reverse on the move, it will not engage and you will strain the gearbox
Don’t be a “cannibal” and try to put into first, reverse or vice versa when the car is still moving. In the majority of cases, the gearbox will not allow the change, but if you force it and it finally picks up the gear there is a good chance that you will also get the gear in your hand.
Release the brake firmly
When you start, release the brake firmly, not slowly. While you are waiting at the traffic light, or in general you are stationary with the transmission dead, do not rev the engine. Also, when it’s time to start, don’t release the brake hesitantly or keep it half-pressed, because this increases friction (and therefore temperature) inside the gearbox.
Automatic transmission shift gears
Do not downshift manually, kick down will select the appropriate gear for you. Automatic transmissions shift gears based on engine speed. When we accelerate, and the revs go up, the transmission prepares for upshifting, while when we slow down, the reverse happens. For this reason, you should not increase mileage by accelerating, and downshift manually.
Put the lever in position P
Don’t forget when you park, you have to put the lever in position P or select the corresponding button and lift the handbrake. If you neglect this, the mechanism tries to hold the gears, which have not locked, putting it at risk of wear and damage.
At Pass At Once it is more convenient to learn to drive automatic transmission with our experienced and diligent driving instructor Birmingham.
However, how to drive a manual transmission car What we introduce is a theoretical method that may have a lot of details and steps. Anyone who is learning to drive a manual transmission car can try to apply it. Or anyone who has a budget and money can go to study directly with an additional expert.
ABOUT US: OUR SCHOOL IS THE BEST ONE FOR THE BEGINNERS. COME AND GRAB THE CHANCE FOR LEARNING THE NEW AND INNOVATIVE STRATEGIES.
RECOMEND ARTICLE: Embrace The Latest Trends In Style